July 15, 2024

Bahan Acuan

Berikut ini adalah beberapa link penyedia bahan acuan :

1. Badan POM

Pusat Pengembangan Pengujian Obat dan Makanan Nasional, Badan POM menyediakan Baku Pembanding Laboratorium (BPL) dan Baku Pembanding Farmakope Indonesia (BPFI).

2. LGC Standards

LGC Standards is a division of the LGC Group, the UK’s designated National Measurement Institute for chemical and bioanalytical measurements and an international leader in the laboratory services, measurement standards, reference materials, genomics and proficiency testing marketplaces.

3. Fapas Reference Materials (RM)

Reference Materials (RMs) are also available from Fapas for some analyte/matrix combinations. RMs have a much higher degree of characterisation than PT or QC materials with a defined chain of traceability. RMs undergo formal stability testing for both short-term and long-term applications. RMs have an associated datasheet which lists the reference values and their expanded uncertainty U. The value of U is not a performance limit but is the uncertainty relating to the reference value. RMs therefore have a greater degree of trust in their values and can be used for method calibration purposes. Fapas RMs are generated according to the principles of ISO Guide 34.

4. Fapas Quality Control Materials (QCM)

Surplus test materials from the batch used for the PT may be available for purchase as quality control (QC) samples. These QC samples may be used for troubleshooting poor performance in the PT, training of new staff, method development or generating QC charts. Fapas QCs have an associated datasheet which provides the same data of assigned values and performance limits as in the PT. The stability assessment of QC samples is the same as that for the PT.


NIST supports accurate and compatible measurements by certifying and providing over 1300 Standard Reference Materials® with well-characterized composition or properties, or both. These materials are used to perform instrument calibrations in units as part of overall quality assurance programs, to verify the accuracy of specific measurements and to support the development of new measurement methods.

6. National Measurement Institute (NMI)

The National Measurement Institute (NMI) is a National Association of Testing Authorities (NATA) accredited reference material producer. We produce and sell matrix reference materials for organic and elemental analysis. Matrix reference materials are used for method validation and quality control.

7. ATCC Certified Reference Material

ATCC Certified Reference Material is reference material which is homogeneous and stable with respect to one or more specified properties and for which traceability and values of uncertainty at a stated level of confidence are established, where applicable.

The inherent variability of biological materials brings unique challenges to establishing standards for in vitro model systems and to setting up ISO-compliant processes to produce them. Biological reference materials produced under an ISO 17034:2016 accredited process offer confirmed identity, well-defined characteristics and an established chain of custody, all qualities essential to their effectiveness as biological standards in research and development.

8. Material Catalogue of JRC

On this catalogue, you find the more than 800 CRMs of the BCR- and IRMM-brand as well as the ERM-branded materials that were produced by the JRC.